Standard Counter programming but this unit works together with the accumulator. TARGET count is programmed to advance by one, each time the cycle expires. Each time the count changes the data is sent to the accumulator unit along with the ID of the source unit. The ID information is critical to allow the accumulator to keep track properly. The ACTUAL count is entered either manually or automatically as completion occurs. The maximum number that can be displayed is 999 after which the display will start at 0 and continue to count. This should be considered in terms of the shift or day total at the planned location. This unit is programmed with the IR Remote Control and then operated with a wired station keypad. The red light is a pause light.
An IR Remote Control for Cycle Counters, a Power Adapter and a six digit station keypad are included with this unit.