Target/Actual Counter which responds to start, stop or pause commands from a command timer. TARGET count is programmed to advance by one, each time the cycle expires. The ACTUAL count is entered either manually or automatically as completion occurs. The difference between the target and actual is calculated and the ratio is indicated on the colored LED. The maximum number that can be displayed is 999 after which the display will start at 0 and continue to count. This should be considered in terms of the shift or day total at the planned location. This unit will respond to control signals for start, pause and stop from a command unit. (see CC8152-T16). This unit is programmed with the IR Remote Control and then operated with a wired station keypad. An IR Remote Control for Cycle Counters, a Power Adapter and a six digit station keypad are included with this unit.
Dimensions: 24″ long x 6-3/8″ high x 2-5/8″ deep.