The standard station keypad for counters. Recommended keypad for all Cycle Counters. Includes keys for UP, TEN-UP DOWN, RESET, START, RUN/PAUSE. An RCA connector on the keypad operates in parallel with the UP key so that a limit switch or other normally open, dry contact switch, can be used to automatically signal task completion. A toggle switch on the top of this keypad defeats the programming circuit in order to avoid interference when other timers are being programmed in the near vicinity (within 40 feet). Programming is done with the IR remote control. This keypad does not program. Connects to counter via 8-foot cable. Note: Longer cable lengths can be purchased upon request.
Note: If you are ordering a keypad for an older unit (before 2009) you must order part number 8000-0619. The wiring has changed.